Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Bridgeton, MO

House Washing for Aluminum Siding in Bridgeton, MO

Soft wash for aluminum siding. A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae. Typical cost $300-$700.

Looking for house washing for aluminum siding in Bridgeton, MO? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. On aluminum siding, the method we use is soft wash.

The right method for the job

Soft washCleaning method
Soft wash, typically under 500 PSIPressure

Cleaning solution: A gentle detergent solution; strong cleaners can dull the finish further.

Caring for aluminum siding

Older aluminum siding often has a chalky, oxidized finish. Washing removes dirt and mildew but also removes loose chalk, which can make faded panels look patchy. If the finish is badly oxidized, washing is usually the prep step before repainting.

Avoid: High pressure, which dents thin panels and strips chalky paint unevenly.

How often: Every 1-2 years.

Is it time for house washing for aluminum siding?

  • Green or black film on the shaded sides of the house
  • Dirt splash along the bottom of the walls
  • Cobwebs and wasp nests under the eaves
  • Chalky or dull-looking siding
  • You're planning to paint, sell or list a rental

What causes the dirt and stains

  • Mildew and algae in shade and humidity
  • Rain splashing soil onto the bottom courses
  • Pollen, dust and road grime
  • Spiders and insects under the soffits

What you can do yourself

  • Rinse small areas with a garden hose and a soft brush on an extension pole
  • Use a mild detergent made for siding, not household bleach straight from the bottle
  • Clear plants and furniture away from walls before a wash
  • Look for loose siding, open seams or damaged caulk before anyone washes the house

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Water driven under siding laps and into wall cavities
  • Broken window seals and water inside the house
  • Stripped paint, raised wood grain or etched stucco from high pressure
  • Ladder falls while spraying

How we handle house washing for aluminum siding

  1. Walk the house and point out problem areas or damage
  2. Cover outlets, lights and fixtures, and pre-wet landscaping
  3. Apply a soft wash solution from the bottom up
  4. Rinse from the top down at low pressure, including eaves and soffits
  5. Rinse plants, check windows and walk the house with you

How much does house washing for aluminum siding cost?

$300-$700Typical range for a typical 1,500-2,500 sq ft home
2-4 hoursTypical time on site
Every 1-2 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for aluminum siding

Local house washing for aluminum siding for Bridgeton, MO

Humid summers in Missouri grow green algae and black mildew on the shaded sides of homes, especially on vinyl and painted wood. A soft wash kills the growth rather than just knocking it off, so the siding stays clean longer.

Crews serve all of Bridgeton (ZIP code 63044), plus Hazelwood (2.2 mi), Saint Ann (3.1 mi), Maryland Heights (3.9 mi) and Saint Charles (3.9 mi). Call (555) 010-0000 for a free quote in Bridgeton.

House Washing for Aluminum Siding: frequently asked questions

How much does house washing for aluminum siding cost in Bridgeton, MO?

House Washing for Aluminum Siding typically costs $300-$700 for a typical 1,500-2,500 sq ft home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for house washing for aluminum siding?

For aluminum siding: soft wash, typically under 500 PSI. What we avoid: high pressure, which dents thin panels and strips chalky paint unevenly. The cleaning solution does most of the work, followed by a gentle rinse.

Is house washing for aluminum siding safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule house washing for aluminum siding?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Bridgeton, MO

Patio Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$400

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Pressure Washing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$600

Exterior Mold & Mildew Removal

Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth.

Typical $250-$700

Roof Cleaning

Soft wash roof cleaning that removes black streaks, moss and lichen without the granule damage pressure washing causes.

Typical $400-$1,000

Paver Cleaning & Sealing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $600-$1,800

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Patio Cleaning

Patio cleaning for concrete, pavers and natural stone, with the pressure and cleaner matched to the material.

Typical $150-$400

Soft Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $300-$800

Roof Cleaning for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $400-$1,000

Pool Deck Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Bridgeton, MO. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote